On the off chance that you are having visitors over at your place frequently, at that point it gets difficult for you to give them access to the internet. You need to give them access to the internet and yet, you likewise don’t have any desire to share your safe, private, home network with any other individual. There are really two different ways by which you can give your visitors access to your Internet network. Either share the subtleties of private, home Wi-Fi network which you utilize or make a Guest Wi-Fi Network for visitors.

What the vast majority would prefer not to do is share their private, home Wi-Fi network with visitors in light of the fact that not exclusively is there an opportunity for the data to be taken yet there is additionally the chance of malware unknowingly spread from the visitors’ gadgets.

Thus, for that reason there is the requirement for a different, surmise Wi-Fi network which can furnish the visitors with internet connectivity and furthermore keep your home network protected and secure. Fortunately, for all the Xfinity clients, there is a component called Xfinity WiFi Home Hotspot through which you give internet access to your visitors without any obstruction with the principle network.

This element, Xfinity WiFi Home Hotspot is accessible without any extra on the off chance that you are a current Xfinity Gateway client. With this component enableed, your Xfinity Wireless Gateway broadcast an extra SSID or WiFi Network, “xfinitywifi”. This is done independently from the principle network, without any obstruction with the primary WiFi network.

Through this network, you can permit your visitors to utilize the internet without you sharing your network password or the fundamental network with them. It is incorporated with the administration without any extra expense and you can enable or disable it whenever you need to.

How to enable the Xfinity WiFi Home Hotspot Feature?

On the off chance that you are a current Xfinity Gateway client and utilizing Xfinity administrations, at that point this component will be accessible without any additional charge. It is a valuable component through which visitors can appreciate the internet without you sharing your principle, secure network with them.

In the event that you have visitors coming at your place frequently, at that point you should keep this element enableed as it comes helpful and permits individuals to appreciate the benefits of Xfinity WiFi.

Here is the manner by which you can enable the Xfinity WiFi Home Hotspot include:

1. Connect to the Xfinity Gateway Network from your PC or Mobile.
2. Open an internet browser and head over to customer.xfinity.com/#/settings/security/hotspot.
3. Sign in to your Xfinity account utilizing the Xfinity ID and login password.
4. Click on the Turn On catch to enable the Xfinity WiFi Home Hotspot include.
5. A confirmation brief will show up, confirm your choice.
6. You will currently get a confirmation message that Your hotspot has been enableed.

In the event that you actually wish to kill this element, at that point essentially click on the Turn Off fasten and confirm your determination.

Remember that your gadget probably won’t be qualified for this element and won’t broadcast any hotspot signal. In the event that you visit the Hotspot page and see the data about Xfinity WiFi yet don’t perceive any alternative to Turn On or Turn Off this element then it implies that your gadget isn’t qualified for this component.

If you want to change the default router WiFi password then follow this step-by-step guide.

NETGEAR:

1. Open your router setup page using its default IP address – 192.168.1.1 / 192.168.0.1 / http://routerlogin.com/.
2. For authentication enter default username and password.
3. Go to Wireless > Security Options > Select WPA2-PSK [AES] > Now enter your preferred password in Passphrase.
4. Apply chances and reboot your WiFi for changes to effect.

D-Link:

1. Login to your router settings page via its default IP Address – 192.168.1.1 / 192.168.0.1.
2. Input your username and password (or here’s list of default username and password).
3. Go to Wireless > Wireless Security > Security Mode set to WPA2 only > Pre-Shared Key: enter your preferred password.
4. Apply the change > restart your WiFi and the new password will be applied.

TP-Link:

1. Login to Router admin panel using its default IP Address – 192.168.0.1 / 192.168.1.1.
2. Enter the default username and password (admin/admin in most cases).
3. Navigate to Wireless > Wireless Security > WPA/WPA2 – Personal (Recommended) > Password.
4. Enter your preferred password and Save the change.

Setting up a NETGEAR Router is very easy and once you have got the router and are connected to it, configuring the router is just a few minutes away. You can follow this quick guide to easily set up your NETGEAR Router.

1. Plugin the ethernet cable at back of your NETGEAR router and power it on.
2. Now connect to internet over WiFi and open your web browser and head over to http://www.routerlogin.com or http://www.routerlogin.net.
   
3. A login page will appear. Enter the default username and password. The default username is admin and the default password is password.
   
4. Once you log in, go to Internet from menu > Setup Wizard > New Connection and follow the NETGEAR Genie to configure your router.
5. If “PPPoE DSL Internet Connection Detected” then ask your ISP for the Username and Password.
   
6. Once your router is configured then internet connection status will turn GOOD.
7. Now visit the Wireless section to configure your Wi-Fi Network.
8. Select an SSID (name) for your Wi-Fi Network and select a suitable password under Security Options (WPA2-PSK) Passphrase.
9. Apply the changes and you’re now all done setting up your NETGEAR Router.

D-Link Router can be configured in just a few minutes and once you have configured the router and set it up, your Wi-Fi connection will set up and you will be able to connect to the internet through your D-Link Router.

Before proceeding, make sure the ethernet cable is attached to modem or an active data jack to the ethernet port in back of your router.

Follow these steps to set up your D-Link Router –

1. Power on your D-Link Router.
2. Connect your PC to the router using an Ethernet Cable or WiFi.
3. Once your PC is connected, open a web browser and go to http://192.168.0.1 or http://192.168.1.1 (The default gateway address may vary from model to model).
   
4. A login page will appear. The default username is admin and the password field is to be left blank. Click on Log In.
5. Now, you can configure and set up your router using the Internet Connection Setup Wizard.
6. Under Wireless Setup enter SSID (WiFi Name) and Key (Password).
   
7. Under WAN Setup choose Connect type: DHCP/PPPoE/Static (You can ask your ISP about your internet connection and the required details).
8. After you have configured your internet connection, you can then click on Save and Connect and the router will now connect to the Internet.
9. You can then visit the Wireless Settings and set up your Wi-Fi Network including its SSID and password.

If you have bought a new TP-Link Router, then configuring the router and setting it up is really easy. You can easily set up your new WP-Link Wi-Fi router and will be able to use it.

Note: To connect to the internet, the router must be connected to an active modem or data jack

Follow this guide to set up your new TP-Link Router:

1. Power on the router and connect your PC to the router using an Ethernet cable.
2. Once connected, open a web browser and head over to 192.168.0.1 or www.tplinkwifi.net.
   
3. Set your router login password by entering it twice. It is preferred to keep it simply, “admin”.
4. Click on Let’s Get Started/Login.
   
5. Now, follow the on-screen instructions and configure your Internet and Wireless Network using the Quick Setup option.
   
6. Enter the name (SSID) for your Wireless Network in the given field and also, set a password to secure your Wi-Fi network.
7. Now, you can finish the process, after which you will be able to join the Wireless Connection with the SSID using your password.

192.168.1.254 and 192.168.0.1 are set as the default IP address on most routers and modems. However, if you cannot connect to your device using this IP address, your device may have been assigned a different IP address. In this case, you need to use a different method to find your device’s IP address. This method differs according to the trading system you use. You can easily find the default IP address of your router by selecting the one that matches your operating system from the list below and following the steps.

Windows

If you are a Windows user, the things you need to do are very few and easy. You can find your router IP address in Windows by following the steps below:

1. Click on Windows Start Menu.
2. In the search box, type Command Prompt or cmd.
3. In the Command Prompt application, type ipconfig in the box and press Enter.
4. The Default Gateway section represents the default IP address of your device.

macOS

If you are a macOS user, the actions you need to do are similar to Windows. You can find your router IP address in macOS by following the steps below:

1. Follow Apple Menu > System Preferences > Network.
2. Find your current internet connection.
3. Click on the Advanced button.
4. You can see your device’s default IP address in the TCP/IP tab.

Android

If you are an Android user, there are several methods you can apply.

1. Open the Wi-Fi section in the Settings menu.
2. Click Manage Network Settings.
3. Click Show Advanced Options.
4. Select Static from the IP Settings list.
5. In the Gateway section, you can see the default IP address of your router.

You can also easily find your device’s default gateway using third party apps. In this regard, you can use applications such as Wi-Fi Analyzer.

iOS

If you are an iOS device user, you can follow the steps below:

1. Click Wi-Fi from the Settings menu.
2. Find your current internet connection.
3. Click the Static tab.
4. In this tab you can see the IP address of your router.

Linux

If you are a Linux user, you can follow the steps below:

1. Follow Applications > System Tool > Terminal.
2. Run “ip r | grep default” or “route -n” in the terminal application.
3. The Gateway section represents your default router IP address.

If you have forgotten the username and password required to access the admin panel of your router or modem, there are a few things you can do:

Default Username and Password

Many people do not know the default username and password of their router. Login information becomes necessary only when needed. You don’t need to know your default username and password by heart, because finding them is extremely easy. For this, you can take a look at the user manual that came with your device. If you can’t find the user manual, check the label on the back of your device. You will surely find your default username and password in one of them. If these methods did not work, you can take a look at our default username and password list for the routers we have prepared for you.

Perform a Factory Reset

If you have changed your password before and you cannot remember it now, you can fix this problem only by resetting your device to factory settings. All information will be reset when you reset your router. This way, you can log in using the default username and password. To factory reset your device, follow these steps:

1. Find an small and thin object like a needle or toothpick.
2. Locate the RESET button on the back of your device.
3. Hold down the reset button for a few seconds with the needle or toothpick.
4. Release when your device lights start flashing.
5. After about 1 minute, your device will be reset and restarted.
6. You can now log in to the admin panel using the default username and password.